Manipulating Objects in the 3D View
You can manipulate different shapes and elements, such as collision geometry, parts, assemblies and mechanisms, in the 3D View.
Transform toolbar
You must first select an object before you can use the buttons in the Transform toolbar as shown below.
Transform Object:
1: Move 2: Rotate 3: Resize 4: Measure
Transform Object's Mass Properties:
5: Move 6: Rotate 7: Resize
Tool feedback
8: Transform Feedback
Snap Object:
10: Snap to Grid 11: Snap to Angle
Transform settings:
9: Local and World reference.
12: Resize Type
13: Grid Settings
Context Display
Conventions
Depending on objects that are selected in the 3D view or the Explorer view, buttons to manipulate the selected objects are enabled or disabled accordingly.
In most cases, the selected active button has a light blue background , others simply have a black background.
In some cases, blue and black button backgrounds are also used to differentiate between the toggle options such as the Local/World Reference or the Resize Type button .
Clicking the Move, Rotate, Resize and Measure buttons, the transform feedback will show the proper transform information.
When manipulating objects in the 3D View, an axis will be displayed to indicate that the object can be manipulated. This axis may be different depending on the action, such as rotating, moving or resizing.
Tip
To help you identify objects more quickly, you can view collision geometries in color.
To show collision geometries in color, from the Editor home page, navigate to the Options menu → Display tab →Collision Geometries and then click to select Enable Color Display.
Transform Object:
Transforming objects can be done in local or world reference. For more details, refer to Local and World reference
Moving an Object
Select the object in the 3D View or the explorer view. The object's color is changed to indicate that it is selected.
From the Transform toolbar, select the Move button
. The axis is displayed on the object.
Do one of the following:
Click the X, Y, or Z axis and move the object along the axis.
Click the plane in between any two axes to move the object along two axes at once. Note that the color of the plane matches the axis that will be ignored.
Click the box at the origin of the axes to move the object on all planes.
Rotating an Object
Select the object in the 3D View or the explorer view. The object's color is changed to indicate that it is selected.
From the Transform toolbar, select the Rotate button
. The rotate controls and the center axis are displayed on the object.
Select the axis that appears yellow while selected and rotate the object around it. While rotating, the angle value is shown in degrees.
Resizing an Object
Objects that are resizable include collision geometries (box, sphere, cylinder and capsule), decal object and deformable terrain object. The button becomes enabled when resizable object is selected.
Select the object in the 3D View or the explorer view. The object's color is changed to indicate that it is selected.
From the Transform toolbar, select the Resize button
.
Select the area in the object that you want to resize:
For the box, click one of the faces and drag to resize. Resize type can be chosen to resize symmetrically or just resize one side. For more details, refer to Resize Type
For spheres, click the sphere surface and drag to resize along the diameter.
For cylinders and capsules, you can resize the diameter and the height.
4. Select one of the resize handle and pull it along one axis or diagonally if you want to resize in two axes at once.
Measuring an Object
You can use the Measure tool to find the distance between two objects, or two points on the same object.
Select the Measure button
in the Transform toolbar to activate the measuring function.
Click an object to start measuring
Move the cursor to the point whose distance you want to measure from the initial position. The measuring line will change from red to white when you hover over an eligible object.
Click once you have settled on an eligible object.