{"type":"doc","content":[{"type":"paragraph","content":[{"type":"hardBreak"}]},{"type":"panel","attrs":{"panelType":"error"},"content":[{"type":"paragraph","content":[{"text":"This page contains information about our legacy OpenGL renderer. If you follow this tutorial while using our new Vulkan renderer, the graphics options and visualization won't be equivalent.","type":"text"}]},{"type":"paragraph","content":[{"text":"However, the configuration and behavior of the dynamics extensions remain the same.","type":"text"}]}]},{"type":"paragraph","content":[{"text":"In this training pack, we will go over key concepts and guidelines to get you started with nautical simulations in ","type":"text"},{"text":"Vortex® Studio","type":"text"},{"text":".","type":"text"}]},{"type":"paragraph","content":[{"text":"This module focuses on the basics of using ","type":"text"},{"text":"Vortex Studio","type":"text"},{"text":" to create an offshore simulation application. This module covers how to add an ocean to a scene and how to add an existing mechanism to the ocean scene.","type":"text"}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Prerequisites","type":"text"}]},{"type":"paragraph","content":[{"text":"You need to have","type":"text","marks":[{"type":"textColor","attrs":{"color":"#172b4d"}}]},{"text":" ","type":"text","marks":[{"type":"textColor","attrs":{"color":"#172b4d"}}]},{"text":"Vortex® Studio","type":"text","marks":[{"type":"textColor","attrs":{"color":"#172b4d"}}]},{"text":" ","type":"text","marks":[{"type":"textColor","attrs":{"color":"#172b4d"}}]},{"text":"and the Vortex Studio Demo Scenes installed to be able to follow all steps in this tutorial.","type":"text","marks":[{"type":"textColor","attrs":{"color":"#172b4d"}}]}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Creating a Scene With an Ocean","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Start the ","type":"text"},{"text":"Vortex Studio","type":"text"},{"text":" Editor.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the ","type":"text"},{"text":"Scene","type":"text","marks":[{"type":"link","attrs":{"href":"/wiki/spaces/VSD2402/pages/3486812008"}}]},{"text":" document type in the ","type":"text"},{"text":"New Document","type":"text","marks":[{"type":"strong"}]},{"text":" section of the welcome screen to create a new scene.","type":"text"},{"type":"hardBreak"},{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"inline-media-image","parameters":{"width":"","id":"22182062-cd6f-4dc6-be82-c00c2b2b6c5a","collection":"contentId-3486815395","height":"400"}}}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

This will open the scene editor. By default, a new scene does not have any contents. This is why it displays messages indicating that you can drag Toolbox objects in the scene or right-click the workspace to configure scene options.

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"This will open the scene editor. By default, a new scene does not have any contents. This is why it displays messages indicating that you can drag Toolbox objects in the scene or right-click the workspace to configure scene options.","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the ","type":"text"},{"text":"Marine","type":"text","marks":[{"type":"strong"}]},{"text":" section of the ","type":"text"},{"text":"Toolbox","type":"text","marks":[{"type":"strong"}]},{"text":" to see objects related to the creation of maritime environments.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Double-click on ","type":"text"},{"text":"Ocean","type":"text","marks":[{"type":"strong"}]},{"text":" to add an ocean to your empty scene.","type":"text"},{"type":"hardBreak"}]},{"type":"paragraph","content":[{"type":"hardBreak"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

It will take a few seconds for the screen to refresh and the ocean to appear. Once it does appear, the ocean will be very dark, as our scene does not contain any lighting.

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"It will take a few seconds for the screen to refresh and the ocean to appear. Once it does appear, the ocean will be very dark, as our scene does not contain any lighting.","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the ","type":"text"},{"text":"Environment","type":"text","marks":[{"type":"strong"}]},{"text":" section of the ","type":"text"},{"text":"Toolbox","type":"text","marks":[{"type":"strong"}]},{"text":" and double-click on ","type":"text"},{"text":"SkyDome","type":"text","marks":[{"type":"strong"}]},{"text":". This adds a sky, as well as default lighting to the scene.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the middle mouse button and pan around the 3D view to tilt the camera and see the sky.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Use the mouse wheel to zoom in and out of the scene.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"To increase the realism of the ocean's lighting, click on the ","type":"text"},{"text":"Lights","type":"text","marks":[{"type":"strong"}]},{"text":" section of the ","type":"text"},{"text":"Toolbox","type":"text","marks":[{"type":"strong"}]},{"text":" and double-click on ","type":"text"},{"text":"Ambient.","type":"text","marks":[{"type":"strong"}]}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Set the ","type":"text"},{"text":"Intensity","type":"text","marks":[{"type":"strong"}]},{"text":" of the Ambient light to 0.5","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Go to the ","type":"text"},{"text":"Graphics","type":"text","marks":[{"type":"strong"}]},{"text":" section of the ","type":"text"},{"text":"Toolbox","type":"text","marks":[{"type":"strong"}]},{"text":" and double-click on ","type":"text"},{"text":"Adaptive Feature","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

This object allows users to configure the visual quality of shadows, mirrors ocean reflections and other graphically intense features in Vortex Studio.

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"This object allows users to configure the visual quality of shadows, mirrors ocean reflections and other graphically intense features in Vortex Studio.","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the ","type":"text"},{"text":"Run","type":"text","marks":[{"type":"strong"}]},{"text":" button, which looks like a \"Play\" icon located under the 3D view. This will start the simulation, and you will see the waves moving.","type":"text"},{"type":"hardBreak"},{"type":"hardBreak"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

It should be noted that water is infinitely created in all directions when you use the Ocean. If you lose track of your position, press "P" to reset the camera to be near the origin (0,0,0).

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"It should be noted that water is infinitely created in all directions when you use the Ocean. If you lose track of your position, press \"P\" to reset the camera to be near the origin (0,0,0).","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Press the ","type":"text"},{"text":"Stop","type":"text","marks":[{"type":"strong"}]},{"text":" button to stop the simulation.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Select the top-level ","type":"text"},{"text":"Scene","type":"text","marks":[{"type":"strong"}]},{"text":" node in the Explorer.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Press the F2 key to rename the node to \"","type":"text"},{"text":"MarineScene","type":"text","marks":[{"type":"em"}]},{"text":"\".","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Press the ","type":"text"},{"text":"Save","type":"text","marks":[{"type":"strong"}]},{"text":" icon in the top-left of the Vortex Studio interface to save your scene to disk. Create a new folder for your work files. The default name of the saved scene will be ","type":"text"},{"text":"MarineScene.vxscene","type":"text","marks":[{"type":"em"}]},{"text":", based on the name of the updated scene name.","type":"text"}]}]}]},{"type":"paragraph","content":[{"text":"It is always a good practice to save your work regularly. After you have initially saved a file and given it a name, you can use the standard ","type":"text"},{"text":"Ctrl-S","type":"text","marks":[{"type":"em"}]},{"text":" key combination to save the file that you are currently editing. You can also use ","type":"text"},{"text":"Ctrl-Shift-S","type":"text","marks":[{"type":"em"}]},{"text":" to save all open files.","type":"text"}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Adjusting Ocean Parameters","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"To edit an item that was previously created, you need to select it in the ","type":"text"},{"text":"Explorer","type":"text","marks":[{"type":"strong"}]},{"text":" window, located in the bottom-left corner of the ","type":"text"},{"text":"Vortex Studio","type":"text"},{"text":" interface by default.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on ","type":"text"},{"text":"Ocean Dynamics","type":"text","marks":[{"type":"strong"}]},{"text":" in the Explorer window.","type":"text"},{"type":"hardBreak"}]},{"type":"mediaSingle","attrs":{"layout":"align-start","width":27.0},"content":[{"type":"media","attrs":{"width":384,"id":"a8acb1e8-d88c-421c-8685-9a6c41174eaa","collection":"contentId-3486815395","type":"file","height":269}}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Expand the ","type":"text"},{"text":"Ocean","type":"text","marks":[{"type":"strong"}]},{"text":" section, located under ","type":"text"},{"text":"Inputs","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Increase or decrease the ","type":"text"},{"text":"Sea Scale","type":"text","marks":[{"type":"strong"}]},{"text":" to see the effect on the waves. You can restart the simulation and change these properties while it is running since they are ","type":"text"},{"text":"Inputs","type":"text","marks":[{"type":"strong"}]},{"text":". The default sea scale type in Vortex Studio is set to Douglas Scale, but that can be modified using the ","type":"text"},{"text":"Sea Scale Type","type":"text","marks":[{"type":"strong"}]},{"text":" drop-down list, right above the ","type":"text"},{"text":"Sea Scale","type":"text","marks":[{"type":"strong"}]},{"text":" field.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"You can also change some of the environment parameters such as time of day by selecting the ","type":"text"},{"text":"SkyDome","type":"text","marks":[{"type":"strong"}]},{"text":" node in the ","type":"text"},{"text":"Explorer","type":"text","marks":[{"type":"strong"}]},{"text":". Click on ","type":"text"},{"text":"SkyDome","type":"text","marks":[{"type":"strong"}]},{"text":" and set the ","type":"text"},{"text":"Hour Input","type":"text","marks":[{"type":"strong"}]},{"text":" property to 20. This will change the time to 20:00 and the scene lighting will be adjusted accordingly. As with the sea scale, the time of day is an input parameter and can therefore be modified during the execution of the simulation.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Save","type":"text","marks":[{"type":"strong"}]},{"text":" your scene.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the ","type":"text"},{"text":"Simulation","type":"text","marks":[{"type":"strong"}]},{"text":" Section of the ","type":"text"},{"text":"Toolbox","type":"text","marks":[{"type":"strong"}]},{"text":" and double-click on the ","type":"text"},{"text":"Material Table","type":"text","marks":[{"type":"strong"}]},{"text":" item.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click the ","type":"text"},{"text":"Browse","type":"text","marks":[{"type":"strong"}]},{"text":" (...) icon next to the ","type":"text"},{"text":"Material File Name","type":"text","marks":[{"type":"strong"}]},{"text":" in the new item's property sheet and navigate to the ","type":"text"},{"text":"...\\Vortex Studio Content \\Demo Scenes\\Scenario\\OffShore Scene","type":"text","marks":[{"type":"em"}]},{"text":", then select the ","type":"text"},{"text":"Offshore.vxmaterials","type":"text","marks":[{"type":"em"}]},{"text":" file and click on ","type":"text"},{"text":"Open","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"},{"type":"hardBreak"},{"type":"hardBreak"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

The material table contains a list of all materials that will be available in the simulation. Materials are used to determine friction and penetration between rigid bodies as the simulation is executed. The Offshore.vxmaterials file is a sample material table that is provided with the Vortex Studio samples. Users can edit the material table or create their own.

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"The material table contains a list of all materials that will be available in the simulation. Materials are used to determine friction and penetration between rigid bodies as the simulation is executed. The Offshore.vxmaterials file is a sample material table that is provided with the Vortex Studio samples. Users can edit the material table or create their own.","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Save","type":"text","marks":[{"type":"strong"}]},{"text":" your scene.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the top-left button in ","type":"text"},{"text":"Vortex Studio","type":"text"},{"text":" Editor interface (the button with 3 horizontal bars) to go to the ","type":"text"},{"text":"Home Page","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on ","type":"text"},{"text":"Options","type":"text","marks":[{"type":"strong"}]},{"text":", then click on the ","type":"text"},{"text":"Setup","type":"text","marks":[{"type":"strong"}]},{"text":" tab.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the ","type":"text"},{"text":"Browse","type":"text","marks":[{"type":"strong"}]},{"text":"... button for the ","type":"text"},{"text":"Material Table","type":"text","marks":[{"type":"strong"}]},{"text":" section and select the ","type":"text"},{"text":"Offshore.vxmaterials","type":"text","marks":[{"type":"em"}]},{"text":"file so that it becomes the default material table no matter which file you open, once you have restarted the ","type":"text"},{"text":"Editor","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click ","type":"text"},{"text":"Save","type":"text","marks":[{"type":"strong"}]},{"text":" in the Options dialog.","type":"text"}]}]}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Adding an Existing Mechanism to the Scene","type":"text"}]},{"type":"paragraph","content":[{"text":"Any mechanical system that is simulated in ","type":"text"},{"text":"Vortex Studio","type":"text"},{"text":" is stored in a type of file called a ","type":"text"},{"text":"Mechanism","type":"text","marks":[{"type":"strong"}]},{"text":". This will contain many objects, and will also contain some other files such as ","type":"text"},{"text":"Assemblies","type":"text","marks":[{"type":"strong"}]},{"text":" and ","type":"text"},{"text":"Parts","type":"text","marks":[{"type":"strong"}]},{"text":". Before we learn how to create new mechanisms, we will first learn how to add a mechanism to our existing scene.","type":"text"}]},{"type":"orderedList","attrs":{"order":1},"content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Go to the ","type":"text"},{"text":"Basics","type":"text","marks":[{"type":"strong"}]},{"text":" section of the ","type":"text"},{"text":"Toolbox","type":"text","marks":[{"type":"strong"}]},{"text":" and double-click on ","type":"text"},{"text":"Mechanisms From Files","type":"text","marks":[{"type":"strong"}]},{"text":". The \"Add Mechanisms\" dialog contains two main sections: The ","type":"text"},{"text":"Opened Resources","type":"text","marks":[{"type":"strong"}]},{"text":" section would list any mechanism that is currently opened in the editor, while the ","type":"text"},{"text":"Browse","type":"text","marks":[{"type":"strong"}]},{"text":" button below allows you to browse your computer to find existing content.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on ","type":"text"},{"text":"Browse","type":"text","marks":[{"type":"strong"}]},{"text":" button to open a Windows file selection dialog.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Navigate to the ","type":"text"},{"text":"...\\Vortex Studio Content \\Demo Scenes\\Equipment\\Normand_Kraken\\Dynamic\\Design","type":"text","marks":[{"type":"em"}]},{"text":" directory and select the ","type":"text"},{"text":"NormandKraken.vxmechanism","type":"text","marks":[{"type":"em"}]},{"text":" file, then click on ","type":"text"},{"text":"Open","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

After inserting the mechanism, you will see that it will appear above the water by default. When inserting a mechanism, the origin of the mechanism (the 0,0,0 coordinate) is positioned at the origin of the scene (the 0,0,0 coordinate of the scene)

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"After inserting the mechanism, you will see that it will appear above the water by default. When inserting a mechanism, the origin of the mechanism (the 0,0,0 coordinate) is positioned at the origin of the scene (the 0,0,0 coordinate of the scene)","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click on the Normand Kraken node in the ","type":"text"},{"text":"Explorer","type":"text","marks":[{"type":"strong"}]},{"text":" to select it.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click the directional movement button at the top of the 3D view to activate the object movement mode. This will make a movement control appear at the origin of the ship model.","type":"text"},{"type":"hardBreak"}]},{"type":"mediaSingle","attrs":{"layout":"align-start","width":34.0},"content":[{"type":"media","attrs":{"width":291,"id":"501741ce-115a-45a2-b6cd-d0534621090a","collection":"contentId-3486815395","type":"file","height":262}}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Click the blue arrow at the top of directional movement control and slide the mouse down to lower the vessel into the water.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Press the ","type":"text"},{"text":"Run","type":"text","marks":[{"type":"strong"}]},{"text":" button to start the simulation.","type":"text"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

You will see that the ship floats and will start rocking with the waves, based on the current sea state. This occurs since this mechanism already defined the ship's buoyancy and drag parameters. We will learn how to set these parameters as we create our own vessel in the next section. You will also see that the ship automatically starts moving forward. We will stop it in next steps.

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"You will see that the ship floats and will start rocking with the waves, based on the current sea state. This occurs since this mechanism already defined the ship's buoyancy and drag parameters. We will learn how to set these parameters as we create our own vessel in the next section. You will also see that the ship automatically starts moving forward. We will stop it in next steps.","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Stop","type":"text","marks":[{"type":"strong"}]},{"text":" the simulation.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Expand the Normand Kraken object in the ","type":"text"},{"text":"Explorer","type":"text","marks":[{"type":"strong"}]},{"text":".","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Select the ","type":"text"},{"text":"Vessel Interface","type":"text","marks":[{"type":"em"}]},{"text":" node that was made visible in previous step.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Change the current ","type":"text"},{"text":"RPM","type":"text","marks":[{"type":"strong"}]},{"text":" Input from -1,500.00 to 0.0.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Run","type":"text","marks":[{"type":"strong"}]},{"text":" the simulation again to see that the vessel no longer moves forward automatically.","type":"text"}]},{"type":"paragraph","content":[{"type":"inlineExtension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"__confluenceADFMigrationUnsupportedContentInternalExtension__","text":"","parameters":{"cxhtml":"

Once again, the RPM property of the vessel is an Input. This means that it can be changed during the simulation to change the speed of the Vessel.

","block-inline":true,"nestedContent":{"type":"doc","content":[{"type":"panel","attrs":{"panelType":"warning"},"content":[{"type":"paragraph","content":[{"text":"Once again, the RPM property of the vessel is an Input. This means that it can be changed during the simulation to change the speed of the Vessel.","type":"text"}]}]}],"version":1},"reason":"A note macro in a list item can't be created or edited in the new editor."}}}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Stop","type":"text","marks":[{"type":"strong"}]},{"text":" the simulation.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Select the Normand Kraken mechanism in the ","type":"text"},{"text":"Explorer","type":"text","marks":[{"type":"strong"}]},{"text":" window and press the ","type":"text"},{"text":"Delete","type":"text","marks":[{"type":"strong"}]},{"text":" keyboard key to remove it from the scene.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Save","type":"text","marks":[{"type":"strong"}]},{"text":" your scene.","type":"text"}]}]}]},{"type":"heading","attrs":{"level":2},"content":[{"text":"Up Next: ","type":"text","marks":[{"type":"strong"}]},{"text":"Maritime Tutorial 2 : Creating a Vessel Mechanism","type":"text","marks":[{"type":"link","attrs":{"href":"/wiki/spaces/VSD2402/pages/3486817690"}},{"type":"strong"}]}]},{"type":"paragraph","content":[{"type":"hardBreak"}]}],"version":1}