Earthwork Systems Tutorial 3 : Soil Parameters

In this tutorial, users will learn the various characteristics of soil that can be simulated with Vortex® Studio's earthworks physics.

Prerequisites

You must have Vortex Studio and the Vortex Studio Samples installed to be able to complete this tutorial. Additionally, you must have completed Earthworks Training Module 2: Creating an Earthworks Zone

Configuring Soil Types

1. Under the Earthwork Systems folder, select Soil Materials.

2. In the properties, change the Soil Material Preset to Clay in the drop-down menu.

   
   
   

3. Under the Earthworks Zone extension, select Dynamics.

4. Change the Shear Strength to 60%. This will make the soil easier to dig through and increase the amount it will want to spread out.
   
   

   
   
   

5. Change the Flow Velocity Scale to 85%. This will make the particles flow at a slightly slower rate.

6. Under Parameters, change the Initial Relative Density to 50%. This will make the soil less dense and easier to dig through. Activate the "Accessory" view by right clicking on the eye next to the top-level Scene extension to see the effect of changing this value.

   Open

   

7. Under Parameters, change the Cell Size to 0.25 m. This will make the mesh used for soil calculations slightly larger, which will lower the computational requirements. This can be useful if you are running into performance and frame rate issues when running earthworks.

   
   
   

8. Start the simulation and notice the subtle differences in how the soil reacts to the bucket of the excavator.